- Radio system
- TETRA (380 to 420 MHz)
- Supply voltage
- 8 to 28 V DC
- Power consumption
- < 0.5 W, standby < 0.2 W
Key highlights
Open by radio
Push-to-talk or status
TETRA only
Other signals are ignored
Safe release
With loop or light barrier
Low power
Standby below 0.2 W
Views


Detects TETRA only
The module reliably detects TETRA radio without a specific control command. It ignores other radio signals. The sensitivity can be adapted to the surroundings.
Two operating modes
In parallel mode, a detected TETRA signal opens straight away. For greater safety, the module only reacts once an induction loop or light barrier has detected the vehicle.
Installation
With the built-in antenna the module reaches about 5 metres, with an auxiliary antenna up to 15 metres. If the opener is not mounted right at the gate or barrier, the antenna is mounted separately.
At a glance
Features
- Opens gates, barriers and the like with a TETRA radio
- Reliably detects TETRA, other radio signals are ignored
- Release via induction loop, light barrier or control voltage
- Potential-free relay output
- Adjustable sensitivity
- External antenna for remote installation
Applications
- Fire and ambulance stations
- Police stations
- Entrances with gate or barrier
Frequently asked questions
Does the radio have to send a special command?
No. The TETRA opener detects the TETRA signal itself; the push-to-talk button or a status is enough.
Does every passing radio open the gate?
In parallel mode, yes, within the set sensitivity. With release via induction loop or light barrier, the module only reacts when a vehicle is in front of it.
What is the range?
About 5 metres with the built-in antenna, up to 15 metres with an auxiliary antenna. It depends on the installation site.
See for yourself. Live in our showroom.
We advise you in person, tailor the solution to your operating environment and show you the product in live operation.

