Digital radio plug (DR-GW)
Control room connection through the digital radio gateway, maker-independent according to the digital radio plug standard.
Control room connection through the digital radio gateway, maker-independent according to the digital radio plug standard.
How it reaches the workstation.
What works at the workstation.
-
Listen and talk (PTT)With talk request and priority.
-
Group change and group directoryWith group directory (DF plug).
-
Individual callHalf duplex.
-
part. Speed dialSpeed dial numbers from the system configuration.
-
part. Emergency callReceived and routed to the emergency workstation, not triggered.
-
Status
-
SDS and short messages
-
Patch and group call *
-
part. Priority talk *Priority in the talk path, no dedicated priority key at the workstation.
-
Subscriber directoryGroup directory via the DF plug.
-
part. DGNA and regroupRegroup participants into the current group, if the gateway allows it.
-
GPS and locationReceives position reports from the terminals.
-
Recording and journal
-
part. Key simulation and resetOn/off and reset, no key simulation.
-
Talker display
* Line function: the REICHERT controller also provides it on a higher level and partly independent of the radio technology of the individual line. The table shows what the radio system itself offers.
Not available
Channel and zone selectionSelective call and tone callRemote volumeEncryptionDMO and TMOScanningAmbience ListeningCallout and alertingSignal strengthRelay function
Your radio is not listed? We will check the connection.
Tell us the maker and model. We will tell you which path fits and what is possible at the workstation.
